Introducing the SH15 Sugarcane Harvester

The SH15 is a nice priced sugarcane harvester.  It has a 57 HP diesel engine. It's manufactured by TAGRM. For more information, visit www.tagrm.com

Read More

Introducing the Hustler Zeon

The Hustler Zeon is an all electric, zero-turn, riding lawn mower. Forget about having to buy gas. Get rid of the noise and maintenance associated with gas powered engines. There's no belts, filters, or fluids you have to worry about. Not only that, the Zeon can make zero radius turns.

One charge is good for mowing up to one acre. When you're done, just plug it in to re-charge it. With the Zeon Quick Charger, it can be re-charged in around 5 hours 30 minutes.  When it's done charging, unplug it and go.

The Hustler Zeon can go up to 6 mph in forward or up to 3 mph in reverse. The twin lever allows for controlling each drive wheel. There are hand controls for speed, forward, reverse, brake, and zero radius turns.

The Zeon has cutting heights from 1.5 inches to 4.5 inches and can be adjusted in .25 inch increments. It has a digital display showing the hours, charge level, vehicle status, and trouble codes. With zero emissions, this is an environmentally friendly way of mowing your yard.

There are several different attachments and options available for the Zeon. One is a 2 bag catcher that holds 5 bushels. There's also a mulch kit and a light kit which allow you to mow later. There's also a steering level extension kit and the Zeon Quick Charger.

For more information and to purchase the Hustler Zeon go to www.hustlerturf.com

Read More

Introducing the AT-20HD

With Crane

The AT-20HD is a compact tracked tool carrier. It can be equipped with several different tools, e.g., drills, water tanks, plows, snow removal equipment, fire fighting equipment, tool boxes, and so forth. With its compact size of 5 feet in width and ability to make zero radius turns, this powerful tracked vehicle would be perfect for search and rescue, mineral and oil exploration, fire fighting, utilities work or any other industry that needs a compact vehicle that can handle rough terrain.

With Crane

The AT-20HD has a hydrostatic drive, is built with Caterpillar C2.2 Turbo Diesel 65 HP engine, and has a fully equipped cab. The cab can seat two passengers, has a defroster, heater, suspension seats, sliding windows, sound insulation, and an escape hatch. The cab can be customized to come in either single, crew, or bus style. It can handle payloads of up to 2,500 pounds and has a maximum speed of 14 mph.

With Plow & Dump Bed

This awesome, customizable tracked carrier is manufactured in Canada by All Track, Inc. If you are interested in finding out more about the AT-20HD or purchasing one, then go to www.all-track.ca

Read More

Introducing the Mobitrac

The Mobitrac is an amphibious capable tracked carrier that can be fitted with a plurality of different tools specially designed for the Mobitrac. With an easy connector on its lift arm allowing for the easy attachment of different tools, the Mobitrac, which can move on land and water, can function as a harvester, collector, excavator, or dredger. 

The Mobitrac is an excellent choice for a lower cost amphibious capable excavator. It would work great to help clean waterways or for mining. It has excellent maneuverability and weight bearing capabilities. The Mobitrac can drive itself onto and off the trailer which can be carried by a standard vehicle.

The Mobitrac is powered by a Yanmar 29.1 HP engine which complies with EPA standards. It has a 7.9 gallon fuel tank, a hydrostatic drive, a 12V electrical system, with a 45 AH battery. The lift arm has a 550 pound lifting capacity. The pontoons are made of saltwater proof aluminum.

There are several different tools and tool options that that can be used with the Mobitrac. It has an excavator with several different sized buckets. There's also a cutter bar, a mowing/collecting rake, and a dredge pump that have all been specifically designed to easily attach to the hydraulic lift arm of the Mobitrac. There's also a trailer that can be purchased which fits the Mobitrac and can be used by a standard vehicle to transport the machine.

The Mobitrac is made by MOBARN of the Netherlands. For more information and to purchase a Mobitrac you can get in touch with the great people of MOBARN by going to www.mobitrac.eu or www.mobarn.nl

Read More

Introducing the Marsh Master 2LX

 The Marsh Master 2LX can tackle the toughest marshes and swamps. It's an amphibious capable, tracked tool carrier. At 8 feet in width and 15 feet, 10 inches in length, it's a bit larger than the original Marsh Master.

The Marsh Master 2LX can perform a variety of functions as it can carry several different attachments with its 3 point hitch. There's an amphibious cutter attachment, a backhoe attachment, a crane attachment, and more. The Marsh Master 2LX would make a great personnel carrier, being able to transport 8 people.

The 2LX is built with a VM D754 TE3 diesel 80 HP engine. It has a hydrostatic drive. It's capable of traveling at 8 mph on land and 1 mph in water. The auxiliary tool hydraulic circuit has a 6 to 8 gpm pump at 2500 psi. The 2LX has a floating load capacity of 2,200 pounds. It can be towed with a capable of 3/4 ton truck.

If you are interested in finding out more about the Marsh Master 2LX you can visit www.marshmaster.com to contact the great people at Marsh Master.

Read More

Introducing the Terramac RT9

Dump Bed

The Terramac RT9 is a rubber tracked carrier with a plurality of different uses for the pipeline, drilling, mining, utilities, and construction industries.

The RT9 can be customized for more specific purposes. It comes with front and rear bolt on options which allow for mounting a variety of attachments like drills, cranes, lifts, water tanks, excavators, and more.

Drill Mount

The Terramac RT9 is built with a Cummins QSB 6.7 diesel 230 HP engine and has a maximum carrying capacity of 18,000 pounds. There are both open and closed cab options.

The RT9 is 20 feet in length and 8 feet 5 inches in width. The weight of the machine with a bed is 26,000 pounds and without a bed is 21,500 pounds. Fuel capacity is 42 gallons. It has a 8D with 1400 CCA battery and a 12 VDC electrical system.

The Terramac RT9 has a hydrostatic drive system with a 20 gpm pump. The RT9 can travel up to 6 mph. The unloaded gradability is 32% and the turning radius 10 feet. It comes with a limited warranty for 12 months after the date of delivery to the initial purchaser or until the electronic control module exceeds 1000 hours, whichever comes first.

Drilling Rig

This is an awesome looking machine and I would love to drive and/or ride in an RT9.  For more information on the Terramac RT9 you can get in touch with the good people at Terramac which is based out of Illinois, United States. You can do so by visiting their website at www.terramac.com

Read More